In this report we're going to examine how to create your own dog mask. We'll cover the basics and then go on to look at some of the more advanced tips and techniques which you can use.

For those who have a dog that likes to bark, and particularly if your dog loves to play in the garden and other regions of the house, you need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up which will look a little scary at first, but it is really very straightforward. All you've got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can't just cut a rectangular shape from the cardboard, so you'll have to cut around the edge of the mask so that you get something that resembles a cone. The most important thing here is to be realistic with what type of paper plate that you're using.

Then you'll need to wrap the cardboard around the edges of the paper plate, making sure there is a good seal between the two pieces so you can make certain that nothing will leak when you place the mask on. Be sure the edges are cut so that the edges aren't sharp, as this can damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You'll want to start with one side of the mask , so you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it's best that you leave about one-fifth of an inch of paint on the edges so that it runs over the cardboard.

Don't fret too much about the http://blogg.gambit.no/?p=10575 paint getting stuck into your mask. It's easy to remove it later, and it will leave you with a nice finished mask to show off to everyone! It's also a good idea to wash away any excess paint once you're done, so that you don't end up with smudges or smears on your dog.

Then it is time to glue the mask on your dog's head. First you need to make sure that you get a secure fit between the mask and your dog's head. As soon as you've made sure that it's secure, then you can start to glue the mask on the dog's face. Take the piece of cardboard that is used for the base of the mask and fold it over. Make certain it's quite strong and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds until you have the mask snugged firmly onto the surface of your dog. Don't make the folds too big or else it might look messy. As soon as you've done this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask on the dog. Be sure that the ears are flat and make sure that it is not too short or long as this will cause some issues with the mask slipping off the dog's face.

If you're using a dog mask because your dog protection, you'll have to do some sanding to be certain it is safe on your dog. You can do this by sanding off any excess paper which might have been eliminated from your mask.